WESPATT offers proven tail threading
systems for the total paper machine. Paper mills increasingly rely on One
Pass wet press threaders to improve wet end threading">
WESPATT offers proven tail threading
systems for the total paper machine. Paper mills increasingly rely on One
Pass wet press threaders to improve wet end threading, WESPATT Rope Threading
Systems for dryers, One Pass air foils and WESBELT vacuum belts for hands free
threading of the calender, scanner and reel. WESPATT Tail Carrier Systems may
include WESPATT Rope Stretchers, (Rope Tensioners), Rope stretcher control, Rope
Stretcher Broke Guard, Tail Carrier Rope Sheave, Idler Rope Sheave, Return Rope
Sheave, Rope sheave shaft, Rope Sheave Mounting equipment, dryer rope sheaves,
dryer groove filler rings, independent rope drives, free wheeling roll sheaves,
fixed roll sheaves, Wet End Tail Cutters, Dry End Tail Cutters, and Lanex
Carrier Rope
One Pass Systems for air threading include
Tail Clippers, AirFoils, Mounting Equipment and system controls.
|
Tail Carrier Sheaves
(PTC-2100/3100 Series) with their shallow grooves
reduce the likelihood of tearing or pulling tail from ropes.
PTC-2100 Series Double Rope Tail Carrier Sheave
|
|
|
-
on automatic transfers, after-section tail
carrier sheaves are located toward center line of machine and prior-section
sheaves to outside
- unique double rope groove holds carrier
ropes in contact with tail
- helps ensure tail gripping at manual or
automatic transfer areas
- ideal as "helper on longer rope runs to
keep tail gripped securely
- use to correct for offsets in cross
machine direction alignment
|
|
| **Offered with optional EN
protectant, a special sheave coating of teflon-saturated, electro-plated
nickel which will not peel and provides easy clean-up of machinery in harsh
operating environments such as size presses and coaters. |
|
Groove Series No. |
Root Diameter
A
Inches (mm) |
Outside Diameter
B
Inches (mm) |
Form Width
C
Inches (mm) |
|
PTC-2101** |
4-1/4
(108) |
5-1/4
(133) |
2-1/4
(57) |
|
PTC-2102** |
6
(152) |
7
(178) |
2-1/4
(57) |
|
PTC-2103** |
8
(203) |
9
(229) |
2-1/4
(57) |
|
PTC-2104** |
10
(254) |
11
(279) |
2-1/4
(57) |
PTC-3100 Series Triple Rope Tail Carrier Sheave
|
|
|
- unique triple rope groove holds carrier
ropes in contact with tail
- helps ensure tail gripping at manual or
automatic transfer areas
- ideal as "helper on longer rope runs to
keep tail gripped securely
- use to correct for offsets in cross
machine direction alignment
|
|
| **Offered with
optional EN protectant, a special sheave coating of teflon-saturated,
electro-plated nickel which will not peel and provides easy clean-up of
machinery in harsh operating environments such as size presses and coaters. |
|
Groove Series No. |
Root Diameter
A
Inches (mm) |
Outside Diameter
B
Inches (mm) |
Form Width
C
Inches (mm) |
|
PTC-3101** |
4-1/4
(108) |
5-1/4
(133) |
2-3/4
(57) |
|
PTC-3103** |
6
(152) |
7
(178) |
2-3/4
(57) |
|
PTC-3104** |
8
(203) |
9
(229) |
2-3/4
(57) |
Click Here for Shafts, T-Arms, and Base
Brackets
Call us for more information or to place an order 1-800-375-1933
or
|
We now accept these major credit cards!
|
| |